Tech Specs
THE SMARTER WAY TO APPLY PAINT
| NITROMAX | HEATPRO 200 | |
| Product Code | NM30 | HP200 |
| Product Name | Nitromax 30 | HeatPro 200 |
| Product Description | Nitrogen Generator | N2 Heater Controller |
| Heater Wattage (W) | – | 500 |
| Heater Operating Temperature | – | 100°F – 180°F |
| Electrical Requirements | 110/220 VAC 50-60Hz | 110 / 220 VAC 50-60Hz |
| Current Draw (A) | 1.5 | 7.5 |
| Max Inlet Pressure Psi / (bar) | 145 (10) | 120 (8.2) |
| Pressure Drop Psi / (bar) | 10 (0.6) | < 5 (0.3) |
| Max Flow Rate cfm / (LPM) | 30 (850) | 16 (450) |
| Enclosure | Aluminium | ABS |
| Dimensions (H x W x D) (“) mm | (44 x 24 x18) 1117 x 609 x 457 | (16 x 10 x 6) 406 x 254 x 152 |
| Inlet Connection | ½” FNPT | ½” FNPT |
| Outlet Connection | ½” FNPT | ½” MNPT |
| Filtration | 5 stage | optional |
| Weight (Shipping) (lbs) Kg | (180) 95 | (17) 7.7 |
| Country of Manufacture | USA | |
| Certifications | UL, CSA, ETL, CE | |
| Manufacturer Address | 7360 SW Bonita Road, Ste A, Tigard, Oregon, 97224, USA | |
| info@nitroheat.com |
| Plastic Welder and N2 Generator | UNITS |
|---|---|
| Volume output (cfm) | 1 |
| Maximum outlet pressure (psi) | 15 |
| Purity (%) | 98 |
| Nitrogen Outlet | ¼” |
| Power Connection Type | IEC 320 |
| Supply Voltage | 110 VAC |
| Max Current Draw | 8.5A |
| Fuse | 10A |
| Temperature F (C) | 36 – 122 (2 50) |
| Humidity | 80% MAX ≤ 31°C |
| Pollution Degree | 2 |
| Noise dB(A) | <65 |