NITROMAX HEATPRO 200
Product Code NM30 HP200
Product Name Nitromax 30 HeatPro 200
Product Description Nitrogen Generator N2 Heater Controller
Heater Wattage
(W)
500
Heater Operating Temperature 100°F – 180°F
Electrical Requirements 110/220 VAC
50-60Hz
110 / 220 VAC
50-60Hz
Current Draw
(A)
1.5 7.5
Max Inlet Pressure Psi / (bar) 145
(10)
120
(8.2)
Pressure Drop
Psi / (bar)
10 (0.6) < 5 (0.3)
Max Flow Rate
cfm / (LPM)
30 (850) 16 (450)
Enclosure Aluminium ABS
Dimensions
(H x W x D) (“) mm
(44 x 24 x18)
1117 x 609 x 457
(16 x 10 x 6)
406 x 254 x 152
Inlet Connection ½” FNPT ½” FNPT
Outlet Connection ½” FNPT ½” MNPT
Filtration 5 stage optional
Weight (Shipping) (lbs) Kg (180)
95
(17) 7.7
Country of Manufacture USA
Certifications UL, CSA, ETL, CE
Manufacturer Address 7360 SW Bonita Road, Ste A, Tigard, Oregon, 97224, USA
info@nitroheat.com

Plastic Welder and N2 Generator UNITS
Volume output (cfm) 1
Maximum outlet pressure (psi) 15
Purity (%) 98
Nitrogen Outlet ¼”
Power Connection Type IEC 320
Supply Voltage 110 VAC
Max Current Draw 8.5A
Fuse 10A
Temperature F (C) 36 – 122 (2 50)
Humidity 80% MAX ≤ 31°C
Pollution Degree 2
Noise dB(A) <65